|
All
Clear Body allows you
see
how it works
"See
theory in action"
A
true scale replica of
a
real Hovercraft.
It
operates
just like the
full
size craft with fully
functional
lift, thrust
and
rudder control
Watch the Griffon Model on water

Download
- MPG
clip
Now available in our
RC Hovercraft Kits Store Now
|
Transparent
Griffon 2000TDX
RC
Hovercraft Kit
No
mini servos or special battery packs required.
Operates
on standard RC equipment

Kit
Features:
-
All
pre-molded ABS body panels and parts
-
Full
kit of parts including motors, propellers, nuts, bolt,
wire and connectors
-
20
Page detailed construction manual
-
Uses
any 4.8 to 8.4 volt rechargeable batteries
-
Ready
made skirt assembly
-
Water
or land ready
-
Compatible
with 2 or 4 channel radio control systems
-
Forward
and reverse thrust capable
-
ILC
Module compatible giving Independent
lift and thrust motor control with just and 2
channel radio
-
Full
electrical parts kit including motors, wire
-
Decal
sheet
CLICK
HERE to Buy the Tranparent Griffon 2000TDX in our Model Kit Store
|
|
Griffon
2000TDX
Model
Specifications:
Power:
4.8 tor 8.4 volt 600mA/Hr and greater capacity (mA/Hr) NiCad,
MiMH or Lipoly batteries.
Propellers:
Thrust:
3 inch ducted fan
Lift:
3 inch ducted fan
Motors:
280 size
Skirt:
Black Rip-stop Vinyl
Operating
Surface:
Water
or Land (will float off
of hover and return to full hover)
Will
transition from water to land
Radio
Requirements: 2, 3 or 4 channel land based RC systems
( as used in RC cars and boats)
Speed
Controller Requirements: 5 Amp 7-8 cell Electronic Speed
Controller (ESC). Can use ILC model for 2 channel control
with forward/reverse thrust
Craft
size:
Length:
18 inches
Width:
8 inches
Height:
5 inches
Craft
Weight: 17 ounces loaded with battery, ESC and
radio equipment (as in our combo)
|
|
How
Long Will it Take to Build?
Makes
a great weekend project. It will take you approximately 3-4 hours of
construction time to complete it if you have RC modeling experience.
If you're a beginner in RC modeling then allow a day to get the
project completed and have your Griffon 2000TD hovering. Remember
you can always email rcmodel@hovercraftmodels.com
for hotline help!
|
|
To
Finish the Griffon Model
You
will require:
-
One
3oz can of model spray paint - Testors™ or Humbrol™
-
Small
tube - silicone bath seal
-
Small
modeling knife
-
Soldering
iron
-
Styrene
cement (as used on plastic model kits)
-
Some
stick-on RC plane balancing weights maybe required depending
on the type and size of battery used.
|
|
The
Griffon 2000TDX model is supplied with powerful motors that gives
the model superb thrust and lift power as well as outstanding
handling - it will hover backwards as fast as it goes
forwards!
|
|

Download
and read the manual for this kit HERE
The
Tranparent Griffon 2000TDX RC Hovercraft Kit
This
RC hovercraft kit was developed by our model development team with
help from Griffon Hovercraft Ltd in Southampton, UK. It is a
faithful reproduction of the craft at 1/30th scale that
is fully operational, just like the real craft and completely
transparent. Ideal as a science project or class demonstration it operates operates with
standard, off the shelf RC equipment. The craft can also be run as a free
flight model or used in round-the-pole or tethered
experiments.
Loaded with detail this
model is low cost, very easy to build and great fun to operate!
It
can also be painted with standard RC car body paints when
the experiments are over and racing is the next test! It will
operate and look just like our Griffon
2000TDX RC Hovercraft model when painted and will operate on
water and land just like the real, full size craft.
Flexible
Power System
It
will operate on 4, 6 or 7 cells using AA pencells, or rechargeable
NiCad, NiMH or Lipoly batteries.
Kit
Contents
The
Griffon model kit features independent lift and thrust motors and
comes complete with all the parts to construct it. Included in the
kit are the motors, propellers, motor mounts, ready-to-fit skirt,
rudder horn, rudder push rods, full nuts and bolts kit, decal
sheet and detailed 20 page construction manual. The documents with
this kit includes a comprehensive electrical installation and
setup supplement.

Transparent
Thrust Duct and Rudders
Building
on Construction Skills and Understanding
This
model offers an excellent exercise is following instructions and
building an operational machine. It offers the challenging mix
mechanical and electrical skills whilst being an engaging project.
The completion of the model will give an understanding of radio
control systems, observation of physic theory in action and
mechanical construction.
Carrying
Project Payloads
The
transparent Griffon craft is able to carry a payload of 5-7 ounces
for testing autonomous navigation systems, carrying out physics
experiments and mechanical engineering tests. Typical payloads
would be a GPS receiver, mini TV camera/transmitter, PIC based
logger or navigation package and solid-state gyros.
Construction Manual
The
transparent Griffon 2000TDX construction manual gives extensive guidance
with photos through each step of the building process.

"A
Very Detailed Manual"
Download
and read the manual HERE
This
will allow both students and adults build this hovercraft moving confidently through the building process. A
detailed supplement with the manual gives information on wiring
the radio and electrical components and includes electrical
diagrams with options for different radio setups.
Independent
Lift Control
A
unique feature of this model is the ability to independently
control lift and thrust on a just 2 channel radio. By using the
optional Independent Lift Control (ILCTM)
module, developed specifically for this craft, the thrust motors
can be controlled for full forward or reverse thrust and at the
same time maintaining throttle control of the lift motor. All this
is achieved on a standard 2 channel radio with no modifications
and using standard size servos and speed controllers. No expensive
mini servos, radios or battery packs are required. These features
combined with the craft’s ability to operate on water, land, ice
or snow makes it one of the most versatile RC hovercraft ever
made.
|
Order
through our online
secure shopping cart
Transparent Griffon 2000TDX Kit GHC
Including
all parts - Motors, Propellers, Wiring, Ready Made
Skirt, Nuts/Bolts and 20 page Construction Manual
ILC
Module
|
A
Fast, Low Cost, Full Feature Radio Controlled
Hovercraft
Offering -
-
Powerful
RC motors for outstanding performance
-
Proportional
RC throttle on lift and thrust
-
Rough,
tough non-rip skirt
-
Will
operate on water, ice or land
-
Can
be used indoors or out
-
Water
proof body panels and skirt
-
Easy
unbolt and replace maintenance
-
Easy
electric setup and run
-
Forward and reverse
thrust capable
-
Runs
on 4, 6, or 7 cell batteries
-
1/4
mile range with standard 2, 3 or 4 channel R/C radios
"A
scale model operates just like the real thing"
|
Radio
Equipment and Speed Controller:
The speed controller(s), radio, batteries, and servo are not
included in the Griffon 2000TD kit. You will find a compatible 2 channel
radio system,
speed controller and battery for this kit in our
Parts
Store. You could also use an existing 2 or 4
channel radio setup.
|
|
Transparent
RC
Hovercraft
-
Very
easy to build
-
Ready
molded parts
-
Low
cost
-
True
1/30th scale
Transparent
Griffon 2000TDX Kit
 Includes
all parts: Motors, Propellers, Wiring, Ready Made
Skirt, Nuts/Bolts, Construction Manual and 6 cell battery
holder. Kit
part number GH-C
Travels
on land or water,
inside
or out, this electric powered craft will operate on:
-
Water
-
Ice
-
Snow
-
Tiled
floor
-
Wood
floor
-
Concrete
-
Parking
lots
-
Patio
stones
Works
on any smooth terrain and will travel on water with ease. Will float
when not hovering. Will operate on a beach.
|
NEW
- ILCTM Module Lift
and thrust control on a 2 channel radio The
optional Independent
Lift Control (ILCTM)
module was developed specifically for this craft. It allows the thrust motors
to be
controlled for full forward or reverse thrust and at the same time
maintaining throttle control of the lift motor. All this is achieved on
a standard 2 channel radio with no modifications and using standard size
servos and speed controllers. Just
insert the ILC module between your forward/reverse speed controller and
you have control of lift throttle and still have lift forward and
reverse throttle as well. Its that easy! ILC
Module In
Our Parts
Store |
"
Loaded with scale
detail
and yet
very
easy to build "
|
Easy-Build
Steps
The
Griffon 2000TD construction is so easy. Its set out in a
detailed yet simple to follow in a step by step guide - just
follow each step and move to the next.
Simple
Power Up
The
Griffon 2000TD model was designed so that it does not
require special batteries - it uses the standard 4.8 to 8.4
volt 600mA/hr or greater batteries. That means you can use
pen cells or , radio control car rechargeable batteries.
These are available in most hobby stores.
"Installing
the rudders and motors is a breeze!"
Everything
you need is in the box!
The
motor assembly for the Griffon 2000TD is simple and straight
forward. Electrical wiring diagrams are included in the
comprehensive 20 page manual. Just solder on 4 wires,
fit the propellers and bolt the assemblies into the craft
body shell The wire is even in the kit!
|
|
TO
ORDER YOUR
Griffon
2000TDX
THROUGH OUR
SECURE ONLINE
SHOPPING CART
-
CLICK
HERE
Shipping:
We
ship our kits all over the world

|
|